Partition walls

Because it is so easy to work with, JACKOBOARD Plano is ideal for constructing partition walls or shower cubicles, whether on timber or metal stud frames or as free-standing walls.

  • The JACKOBOARD shower element is already installed level with the screed. The metal stud frame forms the substructure; the JACKOBOARD construction boards are cut to the required length.
  • The JACKOBOARD construction boards are fixed using suitable metal screws (5 per m2) and JACKOBOARD insulation board discs.
  • The shower partition wall is finished. Prior to laying the tiles, all of the board joints outside the shower must be filled with JACKOBOARD glass fibre tape.
  • To avoid water dripping down the back, all of the joints and transitions in the wet area of the shower must be sealed with JACKOBOARD sealing tape.
  • The versatile and lightweight elements allow you to build partition walls without difficulty.

on timber or metal stud frames

  • secure with universal screws and JACKOBOARD insulation-board discs (wooden stud frames)
  • secure with self-tapping screws and JACKOBOARD insulation-board discs (metal stud frames)
  • reinforce the construction-board joints with JACKOBOARD glass-fibre tape or JACKOBOARD sealing tape

as free-standing wall

  • for construction boards with a minimum thickness of 50 mm
  • secure by gluing with JACKODUR assembly adhesive
  • reinforce the construction-board joints with JACKOBOARD glass-fibre tape or JACKOBOARD sealing tape
This website uses cookies in order to guarantee the best possible service. With your visit to www.jackon-insulation.co.uk, you agree to our use of cookies.